Fosroc Chemicals

Product Details:

Brushbond RFX is a two component acrylic polymer modi ed cementitious coating which consists of Brushbond RFX powder and Brushbond RFX liquid acrylic emulsion. It requires only the addition of clean water at site to produce an easily brushable coating.Brushbond RFX can simply be applied by stiff brush, roller or trowel to obtain the desired thickness.

Additional Information:

• Production Capacity: 200 nos
• Delivery Time: 3 days from order initiating

Product Details:

Conplast SP430 is based on Sulphonated Napthalene Polymers and supplied as a brown liquid instantly dispersible in water.Conplast SP430 has been  specially formulated to give high water reductions upto 25% without loss of workability or to produce high quality concrete of reduced permeability.

Additional Information:

• Delivery Time: 3 days

Product Details:

Brushbond Roof Guard is a single component acrylic polymer modified, fibre reinforced high build & easy roller applied / brushable coating available in different colours for application in multiple layers, minimum 3 layer application is recommended for best performance.

Product Details:

Renderoc Plug is supplied as a ready to use blend of dry powders which requires only the addition of clean water at site to produce a highly consistent, rapid setting mortar which is easy to apply in many dif cult conditions.  The material is based on a blend of cements, graded aggregates, special ??? llers and chemical additives which control the rate of set and minimise the risk of thermal cracking.

Additional Information:

• Production Capacity: 100 kgs
• Delivery Time: 3 days from order initiating

Product Details:

Nitocote CM210 two-component polymer modi ed cementitious coating is supplied in pre-packaged form. The product is designed to be easily mixed on site using a slow speed drill  tted with a mixing paddle and then applied to the substrate using a trowel for best results. Nitocote CM210, available in grey and white, cures to form an elastomeric impermeable membrane.

Additional Information:

• Production Capacity: 1000 bags
• Delivery Time: 3 days from placing order

Product Details:

Conbextra GP2 is supplied as a ready to use dry powder.  The addition of a controlled amount of clean  water produces a free  owing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded  llers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand.  The low water demand ensures high early strength.  The graded  llers are designed  to assist uniform mixing and produce a consistent grout.

Additional Information:

• Item Code: CHE5817
• Production Capacity: 500 bags
• Delivery Time: 1 days form order placing
• Packaging Details: 25KG BAG

Product Details:

“rpc company & building solutions private limited ( planners & builders) ",  is an iso 9001:2015 certified company, one of the leading providers of this commendable range of civil engineering consultancy services, establishment in the year 2013.  offered products range consists of manufactured sand ( msand ), plastering sand  ( psand ), 6mm aggregate, 12mm aggregate, 20mm aggregate, 40mm aggregate, bolrus, soling stone, rough stone, crusher powder, soil ,fosroc admixtures and non admixture,basf admixtures.  all offered products are prepared using quality tested ingredients. These products are well known among our clients due to their high quality, effective, competitively priced, user-friendly and high purity. Together with this, these products are extensively used in construction works.

we are equipped with a spacious infrastructure. Also, our quality experts make sure to check all the offered construction material on different quality parameters to deliver our client's flawless range.  

builder supply - construction material online store·
  is a exclusive online store for construction and building materials. Builder supply is an flagship services of rpc construction (an iso 9001:2015 certified company) having its operations in tamil nadu,india. Builder supply can able to supply wide range of building material all over the country with premium quality and quantity on which can satisfy your material requirements on time.

 rpc construction solutions: rpc builder supply also produce m-sand. Manufactured sand is an alternative to river sand. Due to the depletion of good quality river sand for the use of construction, the use of manufactured sand has been increased. Rpc group invented m-sand in the year 2013.

rpc  m sand is produced by crushing the hard granite, a rock which helps to provide an aggregate construction material for clients. Rpc-m sand is manufacturing this product by introducing the world‘s best crusher technology - vertical shaft impactor (vsi technology)from finland.

this rock-on-rock technology makes rpc  m-sand more cubical which gives more strength and bonding when applied with allied building materials.

 advantages:

·       it is well graded in the required proportion.

·       rpc m sand does not contain an organic and soluble compound, thus the setting time and properties of cement are not affected and also the required strength of concrete will be maintained.

·       rpc m sand does not have the presence of impurities such as clay, dust and silt coatings. Presence of this kind of impurities in a river and lead to increase of water ratio in a concrete mix, which impairs bond between the cement

·       pastes and aggregates.

·       modern technology like vertical shaft impactor( vsi) is installed in the manufacturing process to give best quality m-sand for the construction works.

fosroc’s tailored constructive solutions are developed by combining our extensive range of products with our team’s expertise and experience to meet the needs of the construction industry. Our range of solutions include:

• concrete admixtures
• surface treatments
• grouts
• anchors
• industrial flooring
• waterproofing
• concrete repairs
• protective coatings
• adhesives
• joint sealants
• cement grinding aid

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 5L,20L,200L

Product Details:

Conplast SP430 disperses the fine particles in the concrete mix, enabling the water content of the concrete to perform more effectively. The very high levels of water reduction possible allow major increases in strength to be obtained. 

Additional Information:

• Item Code: CHE5812
• Production Capacity: 9 TON
• Delivery Time: 1 DAYS
• Packaging Details: SEALED BARREL

Product Details:

TAX EXTRA

“RPC COMPANY & BUILDING SOLUTIONS PRIVATE LIMITED ( PLANNERS & BUILDERS) ",  is an ISO 9001:2015 certified company, one of the leading providers of this commendable range of Civil Engineering Consultancy Services, establishment in the year 2013. Offered products range consists of Manufactured Sand ( MSAND ), Plastering Sand  ( PSAND ), 6MM AGGREGATE, 12MM AGGREGATE, 20MM AGGREGATE, 40MM AGGREGATE, BOLRUS, SOLING STONE, ROUGH STONE, CRUSHER POWDER, SOIL ,FOSROC Admixtures and NON ADMIXTURE,BASF admixtures. All offered products are prepared using quality tested ingredients. These products are well known among our clients due to their high quality, effective, competitively priced, user-friendly and high purity. Together with this, these products are extensively used in construction works.

We are equipped with a spacious infrastructure. Also, our quality experts make sure to check all the offered construction material on different quality parameters to deliver our client's flawless range. 

BUILDER SUPPLY - CONSTRUCTION MATERIAL ONLINE STORE·
  is a exclusive online store for Construction and building materials.Builder Supply is an flagship services of RPC Construction (An ISO 9001:2015 certified company) having its operations in Tamil Nadu,India.Builder supply can able to supply wide range of building material all over the country with premium quality and quantity on which can satisfy your material requirements on time.

 RPC CONSTRUCTION SOLUTIONS: RPC BUILDER SUPPLY also produce M-Sand. Manufactured sand is an alternative to river sand. Due to the depletion of good quality river sand for the use of construction, the use of manufactured sand has been increased. RPC group invented M-Sand in the year 2013.

RPC  M sand is produced by crushing the hard granite, a rock which helps to provide an aggregate construction material for clients. RPC-M Sand is manufacturing this product by introducing the world‘s best crusher technology - Vertical Shaft Impactor (VSI Technology)from Finland.

This Rock-on-Rock technology makes RPC  M-sand more cubical which gives more strength and bonding when applied with allied building materials.

 Advantages:

·       It is well graded in the required proportion.

·       RPC M Sand does not contain an organic and soluble compound, thus the setting time and properties of cement are not affected and also the required strength of concrete will be maintained.

·       RPC M Sand does not have the presence of impurities such as clay, dust and silt coatings. Presence of this kind of impurities in a river and lead to increase of water ratio in a concrete mix, which impairs bond between the cement

·       Pastes and aggregates.

·       Modern technology like vertical shaft impactor( VSI) is installed in the manufacturing process to give best quality M-Sand for the construction works.

Fosroc’s tailored Constructive Solutions are developed by combining our extensive range of products with our team’s expertise and experience to meet the needs of the construction industry. Our range of solutions include:

• Concrete Admixtures
• Surface Treatments
• Grouts
• Anchors
• Industrial Flooring
• Waterproofing
• Concrete Repairs
• Protective coatings
• Adhesives
• Joint Sealants
• Cement Grinding Aid

Product Details:

Nitocote CM210 two-component polymer modifi ed cementitiouscoating is supplied in pre-packaged form. The productis designed to be easily mixed on site using a slow speed drillfi tted with a mixing paddle and then applied to the substrateusing a trowel for best results.Nitocote CM210, available in grey and white, cures to form anelastomeric impermeable membrane.

Product Details:

GST EXTRA

“RPC COMPANY & BUILDING SOLUTIONS PRIVATE LIMITED ( PLANNERS & BUILDERS) ",  is an ISO 9001:2015 certified company, one of the leading providers of this commendable range of Civil Engineering Consultancy Services, establishment in the year 2013. Offered products range consists of Manufactured Sand ( MSAND ), Plastering Sand  ( PSAND ), 6MM AGGREGATE, 12MM AGGREGATE, 20MM AGGREGATE, 40MM AGGREGATE, BOLRUS, SOLING STONE, ROUGH STONE, CRUSHER POWDER, SOIL ,FOSROC Admixtures and NON ADMIXTURE,BASF admixtures. All offered products are prepared using quality tested ingredients. These products are well known among our clients due to their high quality, effective, competitively priced, user-friendly and high purity. Together with this, these products are extensively used in construction works.

We are equipped with a spacious infrastructure. Also, our quality experts make sure to check all the offered construction material on different quality parameters to deliver our client's flawless range. 

BUILDER SUPPLY - CONSTRUCTION MATERIAL ONLINE STORE·
  is a exclusive online store for Construction and building materials.Builder Supply is an flagship services of RPC Construction (An ISO 9001:2015 certified company) having its operations in Tamil Nadu,India.Builder supply can able to supply wide range of building material all over the country with premium quality and quantity on which can satisfy your material requirements on time.

 RPC CONSTRUCTION SOLUTIONS: RPC BUILDER SUPPLY also produce M-Sand. Manufactured sand is an alternative to river sand. Due to the depletion of good quality river sand for the use of construction, the use of manufactured sand has been increased. RPC group invented M-Sand in the year 2013.

RPC  M sand is produced by crushing the hard granite, a rock which helps to provide an aggregate construction material for clients. RPC-M Sand is manufacturing this product by introducing the world‘s best crusher technology - Vertical Shaft Impactor (VSI Technology)from Finland.

This Rock-on-Rock technology makes RPC  M-sand more cubical which gives more strength and bonding when applied with allied building materials.

 Advantages:

·       It is well graded in the required proportion.

·       RPC M Sand does not contain an organic and soluble compound, thus the setting time and properties of cement are not affected and also the required strength of concrete will be maintained.

·       RPC M Sand does not have the presence of impurities such as clay, dust and silt coatings. Presence of this kind of impurities in a river and lead to increase of water ratio in a concrete mix, which impairs bond between the cement

·       Pastes and aggregates.

·       Modern technology like vertical shaft impactor( VSI) is installed in the manufacturing process to give best quality M-Sand for the construction works.

Fosroc’s tailored Constructive Solutions are developed by combining our extensive range of products with our team’s expertise and experience to meet the needs of the construction industry. Our range of solutions include:

• Concrete Admixtures
• Surface Treatments
• Grouts
• Anchors
• Industrial Flooring
• Waterproofing
• Concrete Repairs
• Protective coatings
• Adhesives
• Joint Sealants
• Cement Grinding AiD

Additional Information:

• Item Code: GP1
• Delivery Time: IMMEDIATE
• Packaging Details: 25KG

Product Details:

Nitotile EPW Grout  is a 3 component water miscible epoxy resin tile joint filler based on new generation epoxy resin technology supplied in preweighed packs, ready for onsite mixing and use.

Additional Information:

• Production Capacity: 100 kgs
• Delivery Time: 3 days from order placing

Product Details:

Hydroproof Xtra is formulated to be mixed with cement on site or simply brush applied over concrete or masonry surfaces to provide an effective waterproof membrane.

Additional Information:

• Production Capacity: 100 liters
• Delivery Time: 3 days from order placing

Product Details:

Nitotile GPX cementitious powder is available in grey or white colour.

Additional Information:

• Production Capacity: 100 number
• Delivery Time: 3 days from order initiating

Product Details:

GST EXTRA

“RPC COMPANY & BUILDING SOLUTIONS PRIVATE LIMITED ( PLANNERS & BUILDERS) ",  is an ISO 9001:2015 certified company, one of the leading providers of this commendable range of Civil Engineering Consultancy Services, establishment in the year 2013. Offered products range consists of Manufactured Sand ( MSAND ), Plastering Sand  ( PSAND ), 6MM AGGREGATE, 12MM AGGREGATE, 20MM AGGREGATE, 40MM AGGREGATE, BOLRUS, SOLING STONE, ROUGH STONE, CRUSHER POWDER, SOIL ,FOSROC Admixtures and NON ADMIXTURE,BASF admixtures. All offered products are prepared using quality tested ingredients. These products are well known among our clients due to their high quality, effective, competitively priced, user-friendly and high purity. Together with this, these products are extensively used in construction works.

We are equipped with a spacious infrastructure. Also, our quality experts make sure to check all the offered construction material on different quality parameters to deliver our client's flawless range. 

BUILDER SUPPLY - CONSTRUCTION MATERIAL ONLINE STORE·
  is a exclusive online store for Construction and building materials.Builder Supply is an flagship services of RPC Construction (An ISO 9001:2015 certified company) having its operations in Tamil Nadu,India.Builder supply can able to supply wide range of building material all over the country with premium quality and quantity on which can satisfy your material requirements on time.

 RPC CONSTRUCTION SOLUTIONS: RPC BUILDER SUPPLY also produce M-Sand. Manufactured sand is an alternative to river sand. Due to the depletion of good quality river sand for the use of construction, the use of manufactured sand has been increased. RPC group invented M-Sand in the year 2013.

RPC  M sand is produced by crushing the hard granite, a rock which helps to provide an aggregate construction material for clients. RPC-M Sand is manufacturing this product by introducing the world‘s best crusher technology - Vertical Shaft Impactor (VSI Technology)from Finland.

This Rock-on-Rock technology makes RPC  M-sand more cubical which gives more strength and bonding when applied with allied building materials.

 Advantages:

·       It is well graded in the required proportion.

·       RPC M Sand does not contain an organic and soluble compound, thus the setting time and properties of cement are not affected and also the required strength of concrete will be maintained.

·       RPC M Sand does not have the presence of impurities such as clay, dust and silt coatings. Presence of this kind of impurities in a river and lead to increase of water ratio in a concrete mix, which impairs bond between the cement

·       Pastes and aggregates.

·       Modern technology like vertical shaft impactor( VSI) is installed in the manufacturing process to give best quality M-Sand for the construction works.

Fosroc’s tailored Constructive Solutions are developed by combining our extensive range of products with our team’s expertise and experience to meet the needs of the construction industry. Our range of solutions include:

• Concrete Admixtures
• Surface Treatments
• Grouts
• Anchors
• Industrial Flooring
• Waterproofing
• Concrete Repairs
• Protective coatings
• Adhesives
• Joint Sealants
• Cement Grinding Aid

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: DRUM

Product Details:

GST EXTRA

“RPC COMPANY & BUILDING SOLUTIONS PRIVATE LIMITED ( PLANNERS & BUILDERS) ",  is an ISO 9001:2015 certified company, one of the leading providers of this commendable range of Civil Engineering Consultancy Services, establishment in the year 2013. Offered products range consists of Manufactured Sand ( MSAND ), Plastering Sand  ( PSAND ), 6MM AGGREGATE, 12MM AGGREGATE, 20MM AGGREGATE, 40MM AGGREGATE, BOLRUS, SOLING STONE, ROUGH STONE, CRUSHER POWDER, SOIL ,FOSROC Admixtures and NON ADMIXTURE,BASF admixtures. All offered products are prepared using quality tested ingredients. These products are well known among our clients due to their high quality, effective, competitively priced, user-friendly and high purity. Together with this, these products are extensively used in construction works.

We are equipped with a spacious infrastructure. Also, our quality experts make sure to check all the offered construction material on different quality parameters to deliver our client''s flawless range. 

BUILDER SUPPLY - CONSTRUCTION MATERIAL ONLINE STORE·
  is a exclusive online store for Construction and building materials.Builder Supply is an flagship services of RPC Construction (An ISO 9001:2015 certified company) having its operations in Tamil Nadu,India.Builder supply can able to supply wide range of building material all over the country with premium quality and quantity on which can satisfy your material requirements on time.

 RPC CONSTRUCTION SOLUTIONS: RPC BUILDER SUPPLY also produce M-Sand. Manufactured sand is an alternative to river sand. Due to the depletion of good quality river sand for the use of construction, the use of manufactured sand has been increased. RPC group invented M-Sand in the year 2013.

RPC  M sand is produced by crushing the hard granite, a rock which helps to provide an aggregate construction material for clients. RPC-M Sand is manufacturing this product by introducing the world‘s best crusher technology - Vertical Shaft Impactor (VSI Technology)from Finland.

This Rock-on-Rock technology makes RPC  M-sand more cubical which gives more strength and bonding when applied with allied building materials.

 Advantages:

·       It is well graded in the required proportion.

·       RPC M Sand does not contain an organic and soluble compound, thus the setting time and properties of cement are not affected and also the required strength of concrete will be maintained.

·       RPC M Sand does not have the presence of impurities such as clay, dust and silt coatings. Presence of this kind of impurities in a river and lead to increase of water ratio in a concrete mix, which impairs bond between the cement

·       Pastes and aggregates.

·       Modern technology like vertical shaft impactor( VSI) is installed in the manufacturing process to give best quality M-Sand for the construction works.

Fosroc’s tailored Constructive Solutions are developed by combining our extensive range of products with our team’s expertise and experience to meet the needs of the construction industry. Our range of solutions include:

• Concrete Admixtures
• Surface Treatments
• Grouts
• Anchors
• Industrial Flooring
• Waterproofing
• Concrete Repairs
• Protective coatings
• Adhesives
• Joint Sealants
• Cement Grinding Aid

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: Conplast WL Xtra is supplied in 200ml, 1, 5, 10, 20, 50, and 200 litre containers.

Product Details:

Nitobond SBR(Latex) is modified styrene butadiene emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.

Additional Information:

• Production Capacity: 50 numbers
• Delivery Time: 3 days form order placing

Product Details:

Reebaklens is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear blue solution.

Additional Information:

• Production Capacity: 500 litres
• Delivery Time: 2 days

Product Details:

Nitobond SBR is modified styrene butadiene rubber emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems.  It is resistant to hydrolysis and can therefore be used for external applications too.

Additional Information:

• Production Capacity: 50 nos
• Delivery Time: 3 days form order placing

Product Details:

Rust removing agent for all metal surfaces

Additional Information:

• Production Capacity: 400

Product Details:

rpc company & building solutions private limited,  is an     iso 9001:2015 certified company, one of the leading providers and supplier of this commendable range of civil engineering services, establishment in the year 2013. The range made available by us, is made up of the finest services like construction services and supplier of fosroc products,. .

1.       auromix201

2.        auromix200

3.        auromix400

4.        conplast sp430

5.       conplast sp600

6.       auromix300

7.       auromix300+

8.       cebex112

9.       brushbond roof guard

10.   brush bond rfx

11.   brushbond grey

12.   nitobond ep

13.   nitobond sbr latix

14.   nitocote cm210

15.   rendroc plug

16.   renderoc rg

17.   renderoc hs,

18.   conbextra gp2

19.   renderoc cs

20.   decofill

21.   reebaklens

22.   reebaklens rr

23.   nitocote wall guard(white base)

24.   nitocote wall guard(midtone base)

25.   nitocote wall guard (dark base) & all construction and ready-mix admixtures having a high preference in the market. The offered range is made available to clients as per the norms and guidelines defined by the industry and utilizing the finest resources. In addition to this, the range is priced at the most reasonable rate possible.  
rust remover,cleaning and etching agentt

Additional Information:

• Item Code: RPC-BS-6858
• Production Capacity: 1000 LITRE
• Delivery Time: 1 HOUR
• Packaging Details: CORRIER

Product Details:

Epoxy resin based bonding aggent for old and new concrete

Additional Information:

• Production Capacity: 50
• Delivery Time: 3 days form order placing

Product Details:

Concrete should not segregate and bleed or contain more than 3% air. Do not use microsilica in the concrete as this can lead to problems with crusting when the dry shake is applied. MasterRheobuild or MasterPozzolith water reducing admixtures are recommended for concrete placement and optimum performance. Screeds to which MasterTop 100 is to be applied, should have a minimum thickness of 75mm. Following placement, concrete should be levelled off with a straightedge and then vibrated. The surface is then floated with a wooden float ensuring that it is not closed. Any bleed water should be removed. (Avoid sponge type absorbents). Thereafter sprinkle MasterTop 100 along edges of bays (approx. 80mm strips) where expansion and construction joints will be located. Float into surface using a wooden float.

Additional Information:

• Production Capacity: 1000
• Delivery Time: Immediate
• Packaging Details: 25kg

Product Details:

“RPC COMPANY & BUILDING SOLUTIONS PRIVATE LIMITED ( PLANNERS & BUILDERS) ",  is an ISO 9001:2015 certified company, one of the leading providers of this commendable range of Civil Engineering Consultancy Services, establishment in the year 2013. Offered products range consists of Manufactured Sand ( MSAND ), Plastering Sand  ( PSAND ), 6MM AGGREGATE, 12MM AGGREGATE, 20MM AGGREGATE, 40MM AGGREGATE, BOLRUS, SOLING STONE, ROUGH STONE, CRUSHER POWDER, SOIL ,FOSROC Admixtures and NON ADMIXTURE,BASF admixtures. All offered products are prepared using quality tested ingredients. These products are well known among our clients due to their high quality, effective, competitively priced, user-friendly and high purity. Together with this, these products are extensively used in construction works.

We are equipped with a spacious infrastructure. Also, our quality experts make sure to check all the offered construction material on different quality parameters to deliver our client's flawless range. 

BUILDER SUPPLY - CONSTRUCTION MATERIAL ONLINE STORE·
  is a exclusive online store for Construction and building materials.Builder Supply is an flagship services of RPC Construction (An ISO 9001:2015 certified company) having its operations in Tamil Nadu,India.Builder supply can able to supply wide range of building material all over the country with premium quality and quantity on which can satisfy your material requirements on time.

 RPC CONSTRUCTION SOLUTIONS: RPC BUILDER SUPPLY also produce M-Sand. Manufactured sand is an alternative to river sand. Due to the depletion of good quality river sand for the use of construction, the use of manufactured sand has been increased. RPC group invented M-Sand in the year 2013.

RPC  M sand is produced by crushing the hard granite, a rock which helps to provide an aggregate construction material for clients. RPC-M Sand is manufacturing this product by introducing the world‘s best crusher technology - Vertical Shaft Impactor (VSI Technology)from Finland.

This Rock-on-Rock technology makes RPC  M-sand more cubical which gives more strength and bonding when applied with allied building materials.

 Advantages:

·       It is well graded in the required proportion.

·       RPC M Sand does not contain an organic and soluble compound, thus the setting time and properties of cement are not affected and also the required strength of concrete will be maintained.

·       RPC M Sand does not have the presence of impurities such as clay, dust and silt coatings. Presence of this kind of impurities in a river and lead to increase of water ratio in a concrete mix, which impairs bond between the cement

·       Pastes and aggregates.

·       Modern technology like vertical shaft impactor( VSI) is installed in the manufacturing process to give best quality M-Sand for the construction works.

Fosroc’s tailored Constructive Solutions are developed by combining our extensive range of products with our team’s expertise and experience to meet the needs of the construction industry. Our range of solutions include: 

• Concrete Admixtures
• Surface Treatments
• Grouts
• Anchors
• Industrial Flooring
• Waterproofing
• Concrete Repairs
• Protective coatings
• Adhesives
• Joint Sealants
• Cement Grinding Aid

 

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: BOTTLE

Product Details:

Nitotile Grout is a blend of specially selected cements, fillers and synthetic organic polymers.  When added to water it readily blends to produce a smooth creamy paste which when set is water and mould resistant.  Nitotile Grout is used in conjunction with Nitotile* tile adhesives. 

Additional Information:

• Production Capacity: 100 kg
• Delivery Time: 3 days from order initiating

Product Details:

Decofill acrylic sealant is a white acrylic based gap filler in paste form for application from a cartridge. It is very quick and easy to apply and can be finished or smoothed off with a spatula or a damp sponge. It sets quickly on application and will accept paint or wallpaper finishes. Typical uses for Decofill acrylic sealant are gaps between skirtings, window and door frames, fitted furniture units and ceiling cornices and adjacent plaster work. Where replacement windows are installed Decofill acrylic sealant can be used to make good between new frames and interior plaster work.

Additional Information:

• Production Capacity: 500 kg
• Delivery Time: 3 days form order placing

Product Details:

Plaster of Paris is a non-toxic agent, which can release nuisance dust in handling or during use. In this manner it may affect eye, skin, nose, throat and upper respiratory tract. In other words, we can say that the Plaster of Paris is usually made up of heated gypsum at a high temperature.



Features:

• Packaging Type- Bag
• Packaging Size- 25 Kg
• Color- White
• Usage- Ceiling, Medical

Product Details:

Integral waterproofing liquid admixture for concrete and mortar to IS 2645-2003

Additional Information:

• Delivery Time: 3 to 4 days